Shopping Cart

0

Your shopping bag is empty

Go to the shop

ABS-GF Bambu Lab

40.000 JD

Bambu ABS-GF Bambu ABS-GF is a glass fiber-reinforced ABS filament that enhances both mechanical and aesthetic properties. Compared to regular ABS, ABS-GF excels in strength, stiffness, temperature resistance, and dimensional stability. It is also less prone to deformation and warping. The addition of glass fiber creates a smooth matte finish...

Color

Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament that enhances both mechanical and aesthetic properties. Compared to regular ABS, ABS-GF excels in strength, stiffness, temperature resistance, and dimensional stability. It is also less prone to deformation and warping. The addition of glass fiber creates a smooth matte finish with micro-spot gloss, effectively reducing the visibility of layer lines. ABS-GF is ideal for producing both mechanical parts and decorative items, thanks to its inherent water resistance, wear resistance, durability, and vibrant colors.

PLA Aero

Enhanced Strength and Stiffness

ABS-GF surpasses regular ABS in strength and stiffness, making it ideal for load-bearing and bending-resistant components.


图片加载失败文案
图片加载失败文案
图片加载失败文案
ABS
ABS-GF
Improvement %
Stiffness (Bending Modulus - XY) 1880 MPa
2860 MPa
52.1%
Strength (Bending Strength - XY) 64 MPa
68 MPa
6.3%
Layer Strength (Bending Strength - Z) 39 MPa
46 MPa
17.9%
Heat Resistance (HDT, 0.45 MPa) 87 °C
99 °C
13.8%

Greater Dimensional Stability

Glass fiber reinforcement provides ABS-GF with enhanced dimensional stability compared to regular ABS, reducing warping and deformation during printing. This property makes it particularly suitable for complex mechanical assembly parts or geometric components.

filament
filament

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%

filament

 

Fine Matte Finish

The smooth matte finish and nearly invisible layer lines make ABS-GF perfect for decorative and finely detailed parts.

PLA Aero

Water Resistance & Built to Last

Bambu ABS-GF offers enhanced water resistance and durability, making it suitable for producing lasting household and industrial items such as mechanical casings, connectors, and molds.

filament
filament
filament
filament

Accessory Compatibility

Recommended Not Recommended
Build Plate
Smooth PEI Plate, Textured PEI Plate
Cool Plate SuperTack
Hotend
Hotend with Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm
Hotend with Stainless Steel Nozzle All Size
Glue Bambu Liquid Glue
Glue Stick
/

ABS-GF Hex Code Table

Color Hex Code Display
White #FFFFFF
Gray #C6C6C6
Yellow #FFE133
Orange #F48438
Red #E83100
Green #61BF36
Blue #0C3B95
Black #000000

Parameters Comparison

Learn more different filaments comparison on Bambu Filament Guide >>

ABS
ABS-GF
PA6-GF
Composition Acrylonitrile - butadiene - styrene
Acrylonitrile - butadiene - styrene,
glass fiber
PA6, glass fiber
AMS Compatibility YES
YES
YES
Dry Out Before Use Recommended
Recommended
Required
Printing Speed < 300 mm/s
< 180 mm/s
< 130 mm/s
Printer Type Enclosure
Enclosure
Enclosure
Toughness (Impact Strength - XY) 39.3 kJ/m²
14.5 kJ/m²
27.2 kJ/m²
Strength (Bending Strength - XY) 62 MPa
68 MPa
120 MPa
Layer Strength (Bending Strength - Z) 39 MPa
46 MPa
51 MPa
Stiffness (Bending Modulus - XY) 1880 MPa
2860 MPa
3670 MPa
Layer Adhesion (Impact Strength - Z) 7.4 kJ/m²
5.3 kJ/m²
4.1 kJ/m²
Heat Resistance(HDT, 0.45 MPa) 87 °C
99 °C
182 °C
Saturated Water Absorption Rate/%(25 °C, 55% RH) 0.65
0.53
2.56

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

rfid

 

Recommended Printing Settings
Drying Settings (Blast Drying Oven) 80 °C, 8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with Glue) 80 - 100 °C
Printing Speed < 180 mm/s
Physical Properties
Density 1.08 g/cm³
Vicat Softening Temperature 103 °C
Heat Deflection Temperature 99 °C
Melting Temperature 202 °C
Melt Index 7.56 ± 1.4 g/10 min
Mechanical Properties
Tensile Strength 36 ± 3 MPa
Breaking Elongation Rate 6.3% ± 1.2%
Bending Modulus 2860 ± 130 MPa
Bending Strength 68 ± 4 MPa
Impact Strength 14.5 ± 1.5 kJ/m²

Printing Tips

• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.

• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.

What's in the Box

Filament with Spool*1 & Desiccant*1

图片加载失败文案

Package*1