PLA Glow Bambu Lab

Start typing and hit Enter

Shopping Cart

Your shopping bag is empty

Go to the shop

Back to login

Don’t have an account?Register now

Back to login

Home PLA Glow Bambu Lab

PLA Silk Dual Color Bambu Lab

30.000 JD

PLA Metal Bambu Lab

35.000 JD

PLA Glow Bambu Lab

~~35.000 JD~~ 30.000 JD

Bambu PLA Glow PLA Glow is notable for its unique addition of luminous powder, which gives it a special glow-in-the-dark feature. It retains all the excellent characteristics of traditional PLA, such as ease of printing, high quality, and exceptional mechanical properties. This makes PLA Glow an ideal choice for creating...

Color

Categories : Filaments, Home page, PLA

Description
Review

Bambu PLA Glow

PLA Glow is notable for its unique addition of luminous powder, which gives it a special glow-in-the-dark feature. It retains all the excellent characteristics of traditional PLA, such as ease of printing, high quality, and exceptional mechanical properties. This makes PLA Glow an ideal choice for creating luminous nameplates, logos, jewelry, and various models that need a captivating glow effect.

Unique Glow in Low Light Conditions

Bambu PLA Glow features a unique additive: luminous powder, which makes printed objects emit a captivating glow in the dark.

Accessory Compatibility

	Recommended	Not Recommended
Build Plate	Cool Plate SuperTack, Smooth PEI Plate, Textured PEI Plate	/
Hotend	Hotend with Hardened Steel Nozzle 0.4 mm / 0.6 mm / 0.8 mm Hotend with Stainless Steel Nozzle 0.4 mm	Hotend with Stainless Steel Nozzle 0.2 mm
Glue	Bambu Liquid Glue Glue Stick	/
AMS & AMS lite	AMS	AMS lite*

* A hardened nozzle is required when printing regularly.

* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.

PLA Glow Hex Code Table

Color	Hex Code	Display
Glow Green	#A1FFAC
Glow Yellow	#F8FF80
Glow Pink	#F17B8F
Glow Blue	#7AC0E9
Glow Orange	#FF9D5B

* The hex code indicates the daytime color of PLA Glow.

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Recommended Printing Settings
Drying Settings (Blast Drying Oven)	55 °C，8 h
Printing and Keeping Container's Humidity	< 20% RH (Sealed, with Desiccant)
Nozzle Temperature	190 - 230 °C
Bed Temperature (with Glue)	35 - 45 °C
Printing Speed	< 250 mm/s

Physical Properties
Density	1.26 g/cm³
Vicat Softening Temperature	56 °C
Heat Deflection Temperature	55 °C
Melting Temperature	155 °C
Melt Index	23.3± 2.4 g/10 min

Mechanical Properties
Tensile Strength	32 ± 3 MPa
Breaking Elongation Rate	8.6 ± 1.2 %
Bending Modulus	2640 ± 130 MPa
Bending Strength	76 ± 4 MPa
Impact Strength	27.3 ± 2.2 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

• Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.

• The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.

• Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.